#0308 Panel Moulding
1-1/16” x 1-11/16” (thickness x width)
panel cap
dado can be spec
Moulding 148/14...T-35
$90 set up
#0075 Panel Moulding
1/2” x 1-3/4” (thickness x width)
dado can be spec d
Moulding 06/01...T-3
$90 set up
#1552 Panel Moulding
1/2” x 1-3/4” (thickness x width)
Moulding 105/13...T-14
$60 set up. For raised panels
#1908 Panel Moulding
9/16” x 1-3/4” (thickness x width)
Moulding 134/14...T-188
$110 set up
used on inside perimeter of raised panel doors
#0419 Panel Moulding
3/4” x 1-3/4” (thickness x width)
dado can be varied
Moulding 29/04...T-20,26
as shown $110 set up
#1024 Panel Moulding
3/4” x 1-3/4” (thickness x width)
dado can be spec d
Moulding 40/16...T-
$75 set up
#1881 Panel Moulding
13/16” x 1-3/4” (thickness x width)
Moulding 132/15...T-184
$90 set up
specify your dado dimensions
#1153 Panel Moulding
1-1/4” x 1-3/4” (thickness x width)
dado can be spec d
Moulding 74/15...T-106
$90 set up
#0138 Panel Moulding
3/4” x 1-13/16” (thickness x width)
used on plywood with an offset of 1/2" to 3/4". Not the s.t.o.c.k PM6
Moulding 12/05...T-11
$90 set up
#0103 Panel Moulding
9/16” x 1-7/8” (thickness x width)
aka cochran molding
3/4" off set
Moulding 09/04...T-125
$90 set up
#0940 Panel Moulding
5/8” x 1-7/8” (thickness x width)
aka cochran moulding
Moulding 60/07...T-87
$110 set up
#1614 Panel Moulding
5/8” x 1-7/8” (thickness x width)
Moulding 110/12...T-155
$90 set up
cochran moulding
#1470 Panel Moulding
11/16” x 1-7/8” (thickness x width)
Moulding 99/13...T-129
$110 set up 3 knives
cochran moulding
#1837 Panel Moulding
3/4” x 1-7/8” (thickness x width)
Moulding 129/07...T-19
$90 set up
similar to PM-6
#2159 Panel Moulding
1-1/2” x 1-7/8” (thickness x width)
Moulding 177/07...T-226
$100 set up
spec dado dimensions
#0111 Panel Moulding
3/4” x 1-15/16” (thickness x width)
our basic PM-6 (PM6) panel mold stocked in red oak, soft maple, poplar, honduran mahogany, walnut and cherry
Moulding 09/11...T10
PM-6
$90 set up
Note....5/8" offset available also....T-90
Custom setup $90.
#1879 Panel Moulding
1-1/8” x 1-15/16” (thickness x width)
Moulding 132/13...T-186
$110 set up
specify your dado dimensions
#1584 Panel Moulding
1-1/4” x 1-15/16” (thickness x width)
Moulding 108/08...T-151
$110 set up
cochran moulding
#2147 Panel Moulding
5/8” x 2” (thickness x width)
Moulding 176/09...T-90,227
$110 set up
similar to PM-6
#0315 Panel Moulding
11/16” x 2” (thickness x width)
Moulding 22/07...T-31
$110 set up
This angle may have been changed. Recommend bring sample.
