View Mouldings by Category

#0041 Corner, Round, and Edge

1-1/8” x 1-1/4” (width x thickness)

tall DM-3
Moulding 03/01...T-5
$60 set up

#0493 Corner, Round, and Edge

1-3/16” x 1-1/4” (width x thickness)

Moulding 32/09...T-57
$90 set up

#2244 Corner, Round, and Edge

1-1/4” x 1/2” (width x thickness)

Moulding 168/08...T-215
$60 set up

#0279 Corner, Round, and Edge

1-5/16” x 1-5/16” (width x thickness)

OSC
Moulding 143/13...T-24
$150 set up

#2266 Corner, Round, and Edge

1-3/8” x 1/2” (width x thickness)

Moulding 169/14...T-217
$90 set up

#0068 Corner, Round, and Edge

1-1/2” x 3/4” (width x thickness)

aka 1-1/2" half round in stock in soft maple, red oak, cherry, walnut and honduran mahogany
Moulding 05/09...T-10
Symmetrical
$60 set up

#0614 Corner, Round, and Edge

1-1/2” x 1-1/2” (width x thickness)

large outside corner,(OSC)...covers one inch
Moulding 38/07...T-60
$150.00 set-up using 8/4 stock
or 6/4 x 2" blank size...run diagonally with $90 set up

#0149 Corner, Round, and Edge

1-1/2” x 1-1/2” (width x thickness)

aka 1-1/2" qtr round
Moulding 12/12...T-19
$110 set up

2" quarter round set up is $125 set up.

#0408 Corner, Round, and Edge

1-1/2” x 1-1/2” (width x thickness)

Moulding 148/08...T-34
$60 set up

#0085 Corner, Round, and Edge

1-1/2” x 1-1/2” (width x thickness)

aka 1-1/2" bullnose, can be any different height
Moulding 06/07...T-10
Symmetrical
$60 set up

#0826 Corner, Round, and Edge

1-5/8” x 13/16” (width x thickness)

1-5/8 half round
Symmetrical
Moulding 51/13...T-17
$60 set up
We also have a 1-3/4" half round

#0309 Corner, Round, and Edge

1-11/16” x 1-1/8” (width x thickness)

Moulding 147/08...T-25
aka BMC203, (OSC)
$120 set up
price as 1-1/8 X 1-5/8 (6/4 stock)

#2173 Corner, Round, and Edge

1-11/16” x 1-11/16” (width x thickness)

Moulding 163/04...T-82
$125 set up

#2243 Corner, Round, and Edge

1-3/4” x 3/4” (width x thickness)

Moulding 168/07...T-214
$60 set up

#1943 Corner, Round, and Edge

2” x 15/16” (width x thickness)

Moulding 136/18...T-46,192
$110 set up

#0399 Corner, Round, and Edge

2” x 3/4” (width x thickness)

not a true half round
symmetrical
Moulding 27/10...T-34
$60 set up

#0615 Corner, Round, and Edge

2” x 1-1/16” (width x thickness)

large inside corner
Moulding 38/08...T-60
$110 set up

#2052 Corner, Round, and Edge

2” x 1-1/16” (width x thickness)

Moulding 154/06...T-194
$60 set up

#0094 Corner, Round, and Edge

2” x 1-1/4” (width x thickness)

aka 2" bullnose...1-1/4" tall.
tall two inch half round
Moulding 07/09...T-1
$60 set up
Symmetrical
This is the same knife used for a 2" half round; $60 set up

#0464 Corner, Round, and Edge

2” x 1+” (width x thickness)

2-1/8" radius, thickness can be varied
Moulding 30/07...T-49
Symmetrical
$60 set up

#0118 Corner, Round, and Edge

2” x 1/2” (width x thickness)

2" radius
Moulding 08/08...T-6
$60 set up
symmetrical

#2185 Corner, Round, and Edge

2-1/16” x 2-3/16” (width x thickness)

Moulding 163/16...T-207
Tall oblique moulding made in two parts.
$90 set up each

#2254 Corner, Round, and Edge

2-1/8” x 1-1/8” (width x thickness)

Moulding 169/02...T-193
$60 set up

#0496 Corner, Round, and Edge

2-1/8+” x 1-1/2” (width x thickness)

used as an edge around a piece of plywood to make a table top
Moulding 143/05...T-43
$110 set up

#1607 Corner, Round, and Edge

2-1/4” x 1-7/16” (width x thickness)

Moulding 110/05...T-156
$90 set up

#1855 Corner, Round, and Edge

2-3/8” x 1-1/8” (width x thickness)

Moulding 130/11...T-181
$100 set up

#1165 Corner, Round, and Edge

2-3/8” x 1-1/4” (width x thickness)

Moulding 75/11...T-110,23
$90 set up

#0605 Corner, Round, and Edge

2-1/2” x 1-9/16” (width x thickness)

a table perimeter mould
Moulding 150/12...T-
$90 set up

#2054 Corner, Round, and Edge

2-1/2” x 1-1/16” (width x thickness)

Moulding 154/08...T-193
$60 set up

#0032 Corner, Round, and Edge

2-1/2” x 1-1/4” (width x thickness)

aka a true 2-1/2" half round
symmetrical
Moulding 02/09...T-6
$60 set up

#0131 Corner, Round, and Edge

2-7/8” x 1-1/4” (width x thickness)

can be any height
symmetrical
Moulding 08/13...T-26
$60 set up

#0132 Corner, Round, and Edge

2-7/8” x 1-5/16” (width x thickness)

3" radius on concave molding
symmetrical
Moulding 08/14...T-9
$70 set up

#0831 Corner, Round, and Edge

2-7/8” x 2-1/4” (width x thickness)

large OGee
Moulding 52/02...T-79
$90 set up

#2212 Corner, Round, and Edge

3” x 1-1/2” (width x thickness)

Moulding 167/03...T-213
$90 set up

#0167 Corner, Round, and Edge

3” x 1-1/2” (width x thickness)

aka 3" half round, and can be any height, which turns it into a bullnose if the height is more than 1-1/2".
Moulding 13/08...T-19
set up $150...three knives...difficult
symmetrical
A few misc sizes, misc species in stock.

#2372 Corner, Round, and Edge

3+” x 7/8” (width x thickness)

Moulding 180/03...T-159
$60 set up

#0477 Corner, Round, and Edge

3” x 1-1/8” (width x thickness)

Moulding 144/09...T-27
$60 set up

#2387 Corner, Round, and Edge

3+” x 7/8” (width x thickness)

Moulding 181/05...T-230
$60 set up

#0955 Corner, Round, and Edge

3” x 1-1/4” (width x thickness)

Moulding 61/04...T-87
$90 set up

Take your unique conceptual design to the next level. 

We can manufacture custom moulding designed to match your existing profile. Look through our extensive custom mouldings database, or provide us with a sketch and we will quickly create it for you. Our turn around on moulding is 1-2 days.

Submit a message or call (713) 686-6176 to get started. 

PHONE (713) 686-6176
TOLL FREE (800) 606-6176
FAX (713) 686-3217

HOURS
Monday – Friday
7:30 AM – 4:30 PM

LumbermensAssociationofTexasLouisiana logo
Lumbermen's Association of Texas & Louisiana
NationalFederationofIndependentBusiness
National Federation of Independent Business
social bbb
BBB A+ Rating
Like us on Facebook
Houston Hardwoods Company is located in Houston, Texas. We offer the largest selection of mouldings in Texas. Marine grade plywood is our specialty. Every day, we are providing a better selection of softwoods, hardwoods, exotic wood, plywood, MDF and melamine, edgebanding and veneer sheeting. We have been in business for more than two decades, and the organization still starts every day with the partners who got it started!
Print on-page moulding results